Showing posts with label vehicle. Show all posts
Showing posts with label vehicle. Show all posts
Wednesday, September 24, 2014
Simple Battery Charger Vehicle Circuit Diagram
Unlike many boots, this battery charger continuously charges the maximum current, decreasing only near full battery voltage. In this case the full load current source, transformer / rectifier was 4.4A. It tapers to 4A 13.5V, 14.0V 3A, 2A 14.5V and 15.0V in 0A.
Simple Battery Charger Vehicle Circuit Diagram

Parts:
Resistors
R1 = 0.32R
R2 = 8.2R Capacitors
C1 = x 10,000 uF 63V
D1 = 1N4004
D2 = 1N4004
D3 = 1N4004
Q1 = MJ1504
IC REG = 7815
BR1 = 1N4004x4
B1 = 12 Volt Battery
TR 20 volts AC
R1 and R2 are as high power resistor 2W, 3W, 5W or higher. Q1 and IC requires a heatsink good. If they are mounted on the same heatsink and will decrease the circuit turns Q1 gets too hot.
Wednesday, August 27, 2014
Lit Motors Unveils Self Balancing Electric Vehicle C 1
Introducing the C-1, the world’s first gyroscopically-stabilized “rolling smart phone”. This vehicle combines the efficiency and freedom of a motorcycle with the safety and convenience of a car. Offering the “alternative to alternatives” on an exciting and safe platform, the C-1 transforms your daily commute into something to look forward to. Influenced by Scandinavian design, the exterior of the C-1 is both approachable and simple, enveloping the human in subtle curves, softened volumes, and lots of glass.

The overall design foundation is based on its waist line, which wraps around the vehicle’s circumference, and is grounded by the swooping rocker panel, highlighting its unique gyroscopic components. Discs of light glow from the wheel hubs, illustrating the electric hub motors. With design key words: “subtle”, “simple”, and “human”, the C-1 is as happy to be seen as it is to be touched.

The C-1 was designed with you in mind. Lit Motors’ human-centered approach to design makes sure that the experience of sitting in such a unique transportation device is both comfortable and spacious. Through numerous mock-ups and user studies, we determined how much space people want and need. There is even enough room in this device for a friend to ride in the back for short city excursions.

Using electronically-controlled gyroscopes located under the floor – generating over 1,300 ft.-lb. of torque – the C-1 balances at a stop and stays upright, even in a collision. In-hub, direct-drive electric motors (20 kW) provide power and regeneration, while center-hub steering keeps you pointed in the right direction. With a top speed of 100+ MPH and battery packs providing up to 200 miles per charge, the C-1 is perfect for commuters and city dwellers alike. As we are hard at work developing this concept for production, please be patient for the future. Expect to see the C-1 in showrooms by the end of 2014.
Subscribe to:
Posts (Atom)