Wiring Circuit

The ICL7106 and ICL7107 are high performance, low power, 31/2 digit A/D converters including seven segment decoders , display drivers, a reference, and a clock.
The ICL7106 is designed to interface with a liquid crystal display (LCD) and includes a multiplexed backplane drive and the ICL7107 will directly drive an instrument size light emitting diode (LED) display.
Main features of ICL7106 and ICL7107 are : True Polarity at Zero for Precise Null Detection , 1pA Typical Input Current ,True Differential Input and Reference, Direct Display Drive - LCD ICL7106- LED lCL710 , Low Noise - Less Than 15μVP-P , On Chip Clock and Reference , Low Power Dissipation - Typically Less Than 10mW.
Using the ICL7106 and ICL7107 electronic schematic presented in this sheet you can make a simple and very useful digital voltmeter , using few external components .
As you can see in this schematic circuits you can make a digital voltmeter with a LED display or using a liquid crystal display .

This is is a stereo power amplifier schema works up to 22W on each channel. It will be 2x22W output. A few externel components required to support the main component of TDA1554. Heatsink on the power IC is a must to prevent overheating on the power IC. The chip should run cool enough to touch with the proper heatsink installed.

Component part list:

R1__________39K 1/4 Watt Resistor
C1,C2_______10uf 25V Electrolytic Capacitor
C3__________100uf 25V Electrolytic Capacitor
C4__________47uf 25V Electrolytic Capacitor
C5__________0.1uf 25V Ceramic Capacitor
C6__________2200uf 25V Electrolytic Capacitor
U1__________TDA1554 Two Channel Audio Amp Chip
MISC________Heatsink For U1, Binding Posts (For Output), RCA Jacks (For Input)

Operated at 12 Volts and at about 5 Amps at full volume. Lower volumes use less current, and therefore produce less heat. Printed schema board is preferred, but universal solder or perf board will do. Keep lead length short.

In AVR-Based Battery Charger design ATMega 8535 With LCD Display is using AVR microcontroller processor charger with ATMega 8535, process the data viewer charger with LCD, a safety from a hot temperature with the temperature sensor LM35 and several buttons for setting the charger. And component power charger Battery Charger Based on AVR ATMega 8535 With LCD Display is a FET.

Click to view larger

Function-Based Battery Charger Part Series AVR ATMega 8535 With LCD Display