Wiring Circuit

A very simple 4 channel video amplifier electronic circuit project can be designed using NJM2582 ic suitable for video applications with SCART connector . Design of the circuit is very simple and require few external electronic parts .

Some features of the NJM2582 are : Operating Voltage ±5V, +5V, +11V ; 6input 4output , 2input 1output Video SW , Internal LPF , 6dB Amplifier , Internal 75Ω Driver Circuit , DC output for SCART (FUNCTION SW, BLANKING) .

Using the TB2922HQ audio power IC can be designed a very simple and high efficiency power audio amplifier electronic project . TB2922HQ is 2ch BTL audio amplifier for TV or home audio applications.

It includes and the pure complementary P-ch and N-ch DMOS output stage.
This TB2922HQ power audio amplifier project is very simple to be implemented and require few external electronic parts . The TB2922HQ power audio amplifier module can be used with 4 or 8 ohms load . Using a 4 ohms load this power audio circuit will provide a output power around 40 watts and using a 8 ohms load the circuit will provide a output power of 23 volts . If you’ll use a bridge mode connection this circuit will provide an output power around 70 watts . If is used a 4 ohms load this TB2922HQ power audio amplifier project must be powered from a good filtered DC power supply that will provide an output voltage between 9 and 18 volts , and if is used a 8 ohms load , a DC power supply that will provide a n output voltage between 9 and 26 volts will be required .
Some features provided by this audio power amplifier module are : built-in standby switch function ,built-in muting function , built-in various protection circuits: thermal shut down, overvoltage, out to GND, out to VCC, out to out short speaker burned .

A very high power and efficiency 100w power amplifier electronic project can be designed using the STK404 audio power amplifier hybrid ICs that consist of optimally-designed discrete component power amplifier circuits that have been miniaturized using SANYO’s unique insulated metal substrate technology (IMST).

STK404 power audio IC is pin to pin compatible with some other STK series power amplifiers ranging from 45W to 180W (10%/1kHz) .
This audio power amplifier use the STK404-130S audio IC that will provide a maximum of 100 watt output power on a 6 ohms load with 0.4% THD . Using the same IC , can be obtained an output power of 150 watts with 10% THD.
The STK404-130S power audio IC supports a maximum input DC voltage of 64 volts , but typically is recommended a 45 volt dual ( +/-) power supply.
Like other audio amplifiers electronic projects , this high power 100w power amplifier circuit require a very well filtered DC power supply .
Because of the power dissipation , the STK404-130S hybrid audio power IC must be mounted on a heatsink . Therefore, the thermal resistance that satisfies all requirements of these power audio amplifier (for a guaranteed ambient temperature of 50°C) is 1.48°C/W.